Specialty Brushless

 

XPower XC3223/10 LS	XPower XC2205/24
Compact 380 brusless	DIY brushless outrunner
Compact 700 brusless

XPower XC3223/10 LS
This is a special long shaft motor to convert, some of our semi-scale glider, without cutting the nose off. It is particularly well suited for our Grob-103C and the mdm-1 Fox.

With the in the kit included bulkhead, motor install at the right place, allowing the shaft to exit the narrow fuselage.

XPower XC3223/10 LS price: 85.00U$

To complete the assembly you will require our special short yoke and set of folding blades:

  20mm +5° special yoke price: 14.50U$

  XPower FOLDING PROP 13x6 : 7.95U$

HCS Compact 380 brushless motors:

This motor was designed for for small, light  gliders in mind. It's unique design (motor is built into the spinner) brings the weight most up front and gives ideal cooling to the motor.

Standard blades used are Cam 6 x 3 and Cam 7.5 x 4. For limited motor run competition, blades of 8 x 4.5 and 9 x 5 can be used, though only for short burst (5-15 sec.). The larger blades require some fitting since the yoke has a width of 5mm and these blades are 6mm.

Its light weight 29.3 g (1oz including spinner and mount) and compact design, leave a lot of room in these tiny fuselage of the light hlg or dlg.
HCS Compact 380, Price: 69.00U$

HCS C Compact 380 Specs Voltage range 2-3x LiPol RPM per Volt 1770 RPM/V Max. efficiency (%) 77 % Max. loading 9 A/30s No load current / 9V 0,8 A Dimensions 43x30 mm Shaft diameter 3 mm Weight 30 g Recommended model weight 300-600 g Recommended propeller range 6x3; 7.5x4 8x4.5

HCS Compact 700 brushless motors:

This motor is slightly larger for glider up to 2-3 lbs. It's unique design (motor is built into the spinner) brings the weight most up front and gives ideal cooling to the motor.

Standard blades used are Cam 6 x 3 and Cam 7.5 x 4. For limited motor run competition, blades of 8 x 4.5 and 9 x 5 can be used, though only for short burst (5-15 sec.). The larger blades require some fitting since the yoke has a width of 5mm and these blades are 6mm.

Its light weight 58 g (2 oz including spinner and mount) and compact design, leave a lot of room in these tiny fuselage of the light 2m glider.
HCS Compact 700, Price: 79.00U$

HCS C Compact 380 Specs Voltage range 2-3x LiPol RPM per Volt 1485 RPM/V Max. efficiency (%) 75 % Max. loading 20 A/30s No load current / 9V 0,56 A Dimensions 50x40 mm Shaft diameter 4 mm Weight 58 g Recommended model weight 600-1200 g Recommended propeller range 8x4.5; 9x5; 10x8; 11x8

 XPower XC2205/24

This is one of the smallest outrunner we carry, and spin 4 x 4 GWS props, which is ideal for our Crobe micro-glider.

Xpower XC2205/24	Specs
Voltage range	1-2x LiPol
RPM per Volt	2200 RPM/V
Max. loading	7 A/30s
Dimensions	43x30 mm
Weight	15 g
Recommended model weight	100 g
Dimensions	Ø22x23mm
Recommended propeller range	4 x 4

DIY (Do it yourself) brusless motor kits:

These kits feature high quality machined parts with high grade bearings and magnets. They require only winding and final assembly, and they will allow you to assemble these 34g motor to the specification you want, more torque or more rpm just choose the winding from the chart in the assembly manual.

Description	Price U$	Sale U$
Revo DIY Outrunners => Front/rear mount	31.00	27.00
Revo DIY Outrunners => Stick mount	N/A
DIY 300 plus	31.00	27.00
Revo DIY preassembled (3 wire/12 turn) stick mount	59.00	55.00