Schulze - Full line of sensorless controller for brushless motors

Important tips, read about: Long battery cables etc. on future and other speed controllers; Additional capacitors mounting instructions; Recommended switching frequencies values for brushless motors.  CLICK here	Huge sale on future series controller		Looking for the operating manual for your controller: CLICK here
future-value New high-value, cost effective, speed controller for sensored and sensorless, brushless electric motors	Price $ US	Sale $ US	Current rating	Cell count
fut-val-12.40e	99.00	94.00	40/55 A	2-4S Li
fut-val-12.60e	119.00	113.00	60/80 A	2-4S Li
fut-val-18.40o	89.00	84.00	40/55 A	2-6S Li
fut-val-24.60o	109.00	99.00	60/80 A	2-8S Li
Universal controller (car, boat, plane, heli)	Price $ US	Sale $ US	Current rating	Ni Cell count
6-11 cells, 2A BEC
fut-9.06ek (no heli mode) sold out	89.00		6/8 A	2-3Li
fut-9.12ek (no heli mode)	122.00	29.00	12/16 A	2-3Li
6-12(18) cells, 3A BEC (Opto)
fut-12.36e			36/45 A	2-5Li
fut-12.46e sold out	249.00		46/60 A	2-5Li
fut-12.97F	387.00	189.00	97/128 A	2 - 5 Li
6-12 cells, BEC, Car controller for brushed and brushless
U-Force 50	292.00	199.00	50/67	2-4Li
U-Force 75	357.00	259.00	75/100	2-4Li
"USB-adapt-uni" USB-adapter cable PC<-> u-force	35.00	33.00
6-18 cells, Opto				2 - 5 Li
fut-18.46K	225.00		46/60 A	2 - 5 Li
fut-18.46K-F2B	235.00	79.00	46/60 A	2 - 5 Li
fut-18.61	237.00	169.00	61/81 A	2 - 5 Li
fut-18.61K, (option F2B available)	249.00	179.00	61/81 A	2 - 5 Li
fut-18.97F	387.00	249.00	97/128 A	2 - 5 Li
fut-18.97KW, special for Emaxx	419.00	255.00	97/128 A	2 - 5 Li
fut-18.129F sold out	499.00		129/171 A	2 - 5 Li
fut-18.149F sold out	499.00		149/199 A	2 - 5 Li
fut-18.200F sold out	699.00		200/267 A	2 - 5 Li
6-32 cells, Opto
fut-32.28K	225.00	69.00	28/37 A	6 - 32
fut-32.55	387.00	219.00	55/73 A	6 - 32
fut-32.55KA, F3A version with proportional brake sold out	387.00		55/73 A	6 - 32
fut-32.80F sold out	499.00		80/106 A	6 - 32
fut-32.80KA, F3A version with proportional brake sold out	529.00		80/106 A	6 - 32
fut-32.120F sold out	699.00		200/266 A	6 - 32
NEW!
future-l, -xl, -xxl high power speed controllers/governors
fut-l-24.150WK, splash proof, water cooling	379.00		150/200 A	3 - 8 Li
fut-l-32.115	353.00		115/150 A	3 - 10 Li
fut-l-32.115WK, splash proof, water cooling	389.00		115/150 A	3 - 10 Li
fut-l-40.100	353.00		100/133 A	3 - 14 Li
fut-l-40.100WK, splash proof, water cooling	389.00	369.00	100/133 A	3 - 14 Li
fut-xl-32.202WK, splash proof, water cooling	615.00		200/260 A	3 - 10 Li
fut-xl-40.161	535.00		160/210 A	3 - 14 Li
fut-xl-40.161WK, splash proof, water cooling	565.00		160/210 A	3 - 14 Li
fut-xxl-40.303K	829.00		300/400 A	3 - 14 Li
fut-xxl-40.334WK, splash proof, water cooling	1013.00		330/440 A	3 - 14 Li
Controllers accessories
tempsens-2, temperature sensor for future-xxl controller	14.75
tempsens-3, temperature sensor for future-l, -xl controller	14.75
cap-330µF/50V, to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future, smart) pack of 2	6.25
cap-330µF/16V, to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future-9, future-11, slim) pack of 2	5.25
cap-220µF/63V to compensate the additional cable inductivity of lengthen cables between battery and speed controller (future-40.160, smart-36.200) pack of 5	12.75
Combine any Schulze ESC at regular price with any Plettenberg motor at regular price and receive an additional 10% discount (not applicable to sale price)

LiPo-monitoring-, Protection- and Safety devices

Kontronik

Leader in brushless controller design, they now produce some of the smartest controller on the market, the Jazz series. Featuring switched BEC for up to 18 cells. Swing as plug and play controller, for easy quick start in brushless.

MGM Compro

	High quality Czech made ESC
New A series esc, competitively priced and easy to operate

Brushless ESC, standard  (New Expert series compatible to RSCOM)	Price $ US	Sale $ US	Current rating	Cell count
A series controller
A7 (BEC)	44.00	39.00	7/15 A	6 - 10 (3LiPo)
A12 (BEC)	44.00	39.00	12/15 A	6 - 10 (3LiPo)
A25 (BEC)	65.00	59.00	25/30 A	6 - 12 (4LiPo)
A40 (BEC)	82.00	77.00	40/50 A	6 - 12 (4LiPo)
A56 (BEC)	104.00	99.00	56/70 A	6 - 12 (4LiPo)
A74 (BEC)	131.00	125.00	74/90 A	6 - 12 (4LiPo)
A112 (BEC)	149.00	143.00	112/140 A	6 - 12 (4LiPo)
EXPERT+ series controller explained
TMM 1210-3 EXPERT	69.00	65.00	12/15 A	6 - 10 (3 LiPo)
TMM 2516-3s EXPERT	95.00	87.00	25/30 A	6 - 12 (4 LiPo)
TMM 4416-3s EXPERT+ BEC/opto	N/A		40/50 A	6-12/16(4/5 LiPo)
TMM 6032-3s EXPERT			60/70 A	7 - 32 (10 LiPo)
TMM 8024-3s EXPERT+	199.00	179.00	80/100 A	6 - 24 (8 LiPo)
TMM 8016-3s EXPERT+	149.00	139.00	80/100 A	6 - 16 (5 LiPo)
Z-serie controller explained
TMM 8024-3s Z-serie	209.00	189.00	80/100 A	6 - 24 (8 LiPo)
Datalogger for Z-serie controller
Black Box BB03	99.00	87.00
CC-02, black box interface cable	7.50	7.00
MC-04 sensor set cable
Car/Boat controller explained
TMM 25035-3 Car/Boat E-SERIES	449.00	399.00	limited qty
TMM 25035-3 Car/Boat Z-SERIES	479.00
Design with dual external heat sinks:
All TMM aaabb-3 Race Boat expert+ and Z-series available upon request	tbd		ask for current pricing
RS-COM, PC interface for programming all new expert series esc, will also download measured flight data from esc, like max peak current, voltage and temperature.	19.00	15.00
USB-COM++, PC interface for programming all new expert series esc, will also download measured flight data from esc, like max peak current, voltage and temperature. ++ will also allow update of controller software from v3.20 up.	44.00	39.00
UniCard, programming card	27.00	25.00

BEC (Battery Eliminator Circuit)

The BEC eliminates the need for a separate battery pack to power your Rx and servos in electric powered aircraft, cars and boats. Numerous glow and gas powered models can benefit from the BEC by using it to regulate a 3-cell Lithium pack to power receivers. (Read below for more info).

Use the BEC when your cell count and / or number of servos exceed your speed control's ratings.

Simple to install:

• All you do is solder the BEC input leads onto your speed control power input leads.

• Plug the BEC into your RX where you would plug in your Rx battery. - OR - Plug the BEC into an standard on/off switch harness.

• Make sure you disable your speed control's BEC.

FAQ

What makes the BEC different from the BEC in my speed controls?
Speed controls use a linear voltage regulator to reduce your battery pack voltage to 5 volts. The challenge with this kind of system is that it is limited by the input voltage and output current. Each ESC has a limit as to the amount of watts of heat it can dissipate. The Ultimate BEC is a switching power supply where input voltage and output current are independent of each other.

Will the BEC cause any radio interference?
Absolutely not. As a matter of a fact, most speed controls put out way more "noise" than the BEC. The BEC has been designed on a custom copper flooded board and utilizes a shielded coil to eliminate any "noise". Most importantly, any "noise" that radiates from the BEC is not relevant to the bands within our radio systems.

How do you keep your battery from running too low?
Most speed controls have a low voltage cutoff feature to keep you from running down your battery too low. Most low voltage cutoff features cut power to your motor between 4.7 to 5.5 volts. The BEC will go into bypass mode at 5.5 volts. Thus, your Rx will still get power from your battery.

How many servos can I run on the BEC?
Servo current vary by brand and type. However, 8-10 servos should be no problem. The main thing to remember is that the UBEC is rated for 3 amps continuous / 5 amps peak.

How many cells can I use with the BEC?
12S is the maximum.

Are there any applications that the BEC would not be a good choice?
I would not suggest that you use a BEC in any plane that you run a GREAT risk in blowing out your source battery. You will have to make the choice for yourself. (The best example of when not to use a BEC would be a hotliner that is pulling extreme current from the source battery.)

How can the BEC be used in glow and gas powered applications?
Since the BEC is much more efficient than a linear regulator, it is a perfect match to use with lithium batteries to power a receiver. The BEC runs at better than 90% efficiencies when run within specs. What does this mean? You will get significantly more usable energy from the lithium battery pack to power your receiver than if you used a linear regulator. We only recommend 3-cell packs in this application. the higher your input voltage....the more efficient your system will be. When using a 3-cell pack for your source power, the current draw from the battery pack will be almost half of what a 4-cell nicad pack would require. Here's an example:

A 3-cell lithium pack that is 840 mah in capacity would power your receiver and servos for about the same amount of time as a 1500 mah 4-cell nicad pack. If the radio system draws 4 amps a 5 volts (20 watts)...the 4-cell nicad pack will have to drain at 4 amps. However...the 3-cell lithium pack will only have to dump about 2 amps to deliver the 20 watts thru the BEC.