New drastically lowered prices on Schulze chargers!
Schulze
charger are top of the line products, quality and reliability. Click on
picture for details.
***Need to update your
isl series charger,
find more about here.***
Now available: a whole new line of chargers:
Next
GenerationII the ultimate all purpose charger.
|
Model |
Particularity |
Price $ US |
Sale $
US |
|
| next-14-350-eco |
Universal charger / discharger
for e.g.
two times 1-36 Nickel cells
or two times 1-14 Lit cells |
539.00 |
509.00 |
 |
Two build in balancer
groups for up to 7s Lithium cells each
Charge current of output 1 and 2: up to 7 A each
Charge power at 24 V input; output 1 and 2: 200 W
each
Charge power at 12 V input; output 1 and 2: 175 W
each
Special functions: Internal parallel connection of the
2 charging outputs. (charge output 2 is disabled).
Double power (up to 400 W). Double
charge current (14 A) Balancing of up to 14s Lithium cells.
Charge curve memory (4 MByte Flash memory - non volatile).
Deep blue case, transparent. Full / empty display by blue LED
chain (which shines through the case).
Battery buffered real time clock.
(without "nextConn-Set-II", expandable)
... relatively
close to "High-End"... |
| |
Accessories for Next
Generation chargers
|
Model |
Particularity |
Price $ US |
Sale $
US |
USB-adapt-uni |
Interface adaptor
to connect to the 5 V-SIO connector
of the nextGeneration series
as well as to the LiPoCard2
also to the u-force speed controller
and to the prog-adapt-alpha.
Accessories not included:
•
USB-driver (download here)
• USB-cable |
37.00 |
33.00 |
USB-adapt-uni-Set |
Interface
adaptor
to connect to the 5 V-SIO connector
of the nextGeneration series as well as to the LiPoCard2
also to the u-force speed controller
and to the prog-adapt-alpha.
Accessories included:
• USB-stick with 128 MB
• USB-driver on the stick.
• USB-cable to connect to the PC |
59.00 |
55.00 |
BalAd-Ko4 |
Balancing adapter
PCB with terminal pins in 2.54 mm spacing. For 2s, 3s, 4s cells.
Hint: BalCab10-Verl is necessary |
14.50 |
13.50 |
BalAd-TP4 |
Balancing adapter
PCB with terminal pins in 2.00 mm spacing. For 2s, 3s, 4s cells.
Hint: BalCab10-Verl is necessary |
14.50 |
13.50 |
BalAd-Ko8 |
Balancing adapter
PCB.
Pitch 2.54 mm.
Up to 8 balancers/cells. |
23.50 |
22.25 |
BalAd-TP14 |
Balancing adapter
PCB.
Pitch 2.00 mm.
Up to 14 balancers/cells |
23.50 |
22.25 |
BalAd-Set7 |
set of 4
balancing adapter PCBs
(BalAd-EH7, -XH7, -PQ7, -TP7 s.u.)
for 2s ... 7s battery packs. |
26.95 |
|
BalAd-SE4x7 |
Balancing
adapter which is to be plugged in into the balancing connector in the middle
of the nextGeneration II series.
Includes
2 EH male plugs for our BalAd-XX7 adapters
or a direct connection (left adjusted) of
2s ... 7s Graupner/Robbe/MPX batteries.
and 2 BalCab20 male plugs for two Schulze (2s ...) 5s - 7s batteries |
23.50 |
|
BalAd-SE4-7-14 |
Balancing
adapter which is to be plugged in into the balancing connector in the middle
of the nextGeneration II series.
Includes
2 EH male plugs for our BalAd-XX7 adapters
or a direct connection (left adjusted) of
2s ... 7s Graupner/Robbe/MPX batteries.
and 2 BalCab10 male plugs for 2 Schulze 2s - 4s batteries and 1
BalCab20 male plug for a Schulze 2s - 14 s battery
(Hint: When the number of cells are 8s or higher and plugged in to the
BalCab20 male socket, then the second balancing group of the charger (7s;
standard for the battery 2 output) is assigned to the battery 1 output, so
that - to avoid short circuits - the remaining balancing connectors must be
unused). |
23.50 |
|
BalAd-TP7 |
Balancing
adapter printed circuit board with male plugs.
Pin spacing is 2.00 mm
Fitting for 2s ... 7s battery packs by e.g.
ThunderPower, TopFuel, FlightPower, ... |
9.50 |
|
|
Model |
Particularity |
Price $ US |
Sale $
US |
|
| BalCab10 |
3 balancer cable kits, 10 pins
connectors, for packs up
to 4 cells |
8.50 |
7.50 |
 |
| BalCab20 |
3 balancer cable kits, 20 pins
connectors, for packs up
to 14 cells |
10.50 |
9.25 |
| BalCab10-verl |
Extension cable for 10 pin connectors.
To connect Schulze
LiPoPerfekt
2s ... 4s battery packs to the LiPoCard resp. the LiPoBalancer. |
11.00 |
9.75 |
 |
| BalCab20-verl |
Extension cable for 20 pin connectors.
To connect Schulze
LiPoPerfekt
5s ... 14s battery packs to the LiPoBalancer. |
14.75 |
12.75 |
LiPoCard: charger with
integral balancer
| LiPoCard III |
The ultimate "breast pocket"-charger
for Li-Poly and Li-Ion batteries. Up to 4 cells. Built-in true balancers and
Serial
port. |
109.00 |
82.00 |
 |
| BalCab10 |
3 balancer cable kits, for packs up
to 4 cells |
8.50 |
7.50 |
|
Charger accessories
|
Model |
Particularity |
Price $ US |
Sale $
US |
|
| charging cables |
1 pair, 2.5mm2, 75cm, red&black,
safety-plug with 4mm protective slide-sleeve |
14.00 |
12.50 |
 |
| isl 8- elast- 0.33 |
external discharge resistor (to
7cells) with fan 0.33Ohm/300W, about 85x85x105mm |
105.00 |
97.00 |
 |
| isl 8- elast- 0.66 |
external discharge resistor (to
12cells) with fan 0.66Ohm/300W, about 85x85x105mm |
105.00 |
97.00 |
Orbit makes
some of the smartest charger at very affordable price, great charging algorithm.
Click on model for details.
 |
|
Charger
model |
Price $ US |
Sale
$ US |
|
POCKETLADER-COMBO,
Mini charger with balancer, up to 65W, for NiMh/NiCd-
and Lithium-batteries (LiPo/LiFP-A123) |
205.00 |
199.00 |
Pocketlader, Mini charger, up to 4 A,
1-12(14) NiMh/NiCd- or 1-5s Lithium Polymer(LiPo)-cells
User manual, click here. |
129.00 |
N/A |
Pocketlader USB interface,
SIO PC interface for the evaluation of
charge data and for firmware update |
36.00 |
31.00 |
|
COMBO Adapter-L,
battery adapter 20cm for POCKERLADER-COMBO |
7.00 |
6.50 |
V6.5
E-Prom upgrade chip
Specify V6 or Pro and your current version
see below for procedure |
19.00 |
|
|
LiPo checker Pro, external balancing and equalizing module
[0605] |
89.00 |
84.00 |
| Adapter for TP packs |
7.00 |
|
| |
|
|
| SIO/RS232 adapter for
Lipo checker to V6 or Pro charger
[0632] |
16.50 |
|
|
|
|
 |
 |
Orbit V6 microlader was reviewed by Dave Robelen in Model Aviation magazine of June 2004, in his column Micro
Flying.
|
The
Microlader update 6.5
features adjustable charging voltage (CV) for the Lithium-mode (to
support LiFe, A-123, etc..) and supports close loop charging with the
LiPo-Checker [0605]. The Microlader PC-interface and a special
adapter [0632] is needed for this function.
Update procedure:
Microlader 6.1-6.4: =>
update by new chip v6.5
Microlader PRO 6.1-6.4: => update by new chip PROv6.5
Microlader 6.0: => update 6.A5 by Orbit only, send charger in. ~65.00U$
Microlader 5.0: => update 6.A5 by Orbit only, send charger in. ~85.00U$
Microlader PRO/6.0: => update 6.A5 by Orbit only, send charger in. ~64.00U$
Hyperion
CHARGER AND BALANCER
 |
Hyperion HP-EOS-0606i Li-Poly
DC Charger/Balancer,
price
99.95U$
Integrated (built-in) Hyperion LBA
balancer
1~6 cell Li-Poly, Li-Ion or A123 charger / balancer
1~14 cell NiCad / NiMH
1~6 cell Sealed Lead Acid
6S, 6A, 50 watts
Includes:
Input cable with Clamps
Output cable with 4mm connectors
2S~6S balancer multi adapter
HP-LBA10-HP |
Turnigy CHARGER AND BALANCER
|
 |
Turnigy Accucel-6 50W 5A
Balancer/Charger,
price: 49.00
The Turnigy Accucel 6 is an entry
level balancing charger and discharger which can
handle up to 6 cells and 5A. The Accucel-6 will
handle LiPo/LiFe up to 6S and NiMH/NiCd up to 15S
and shows individual cell voltage during charge with
real time updates throughout the charge cycle.
Bundled with the Accucel-6 is a bunch of input and
output wires which should satisfy any charging
requirement.Input Voltage: 11~17v
Circuit power: Max Charge: 50W/Max Discharge:5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v
Weight: 355g
This charger has a JST-XH charge
plug, which makes it compatible with Zippy, HXT,
Loong Max and any pack with a JST adapter.
|
 |
FP & TP Plug
Adapter. Connects Thunderpower and Flightpower packs to
Turnigy, iMAX and GT Power chargers. Price: 19.95U$
HP & PQ Plug Adapter. Connects Enerland (Polyquest,
Hyperion) packs to Turnigy, iMAX and GT Power chargers.
Price: 19.95U$
EH Plug Adapter. Connects JST-EH style
balance plug packs to Turnigy, iMAX and GT Power
chargers. Price: 19.95U$ |
| |
|
|
|
|
