MP Jet .040 PB Classic diesel engine
Specifications: |
|
|
Bore: |
8mm |
0.314 |
Stroke: |
12mm |
0.472 |
Swept Volume: |
0.603ccm |
0.037cu-in |
Weight: |
50g |
1.76oz |
Recommended rpm: |
5000-10000 r.p.m. |
|
Recommended prop: |
7 x 3 8 x 4 |
|
The MP Jet .040 PB Classic is a functional
replica inspired from post War engines. A two stroke diesel
engine equipped with integral tank, a piston controlled
compression, long stroke type, single transfer and two sides
exhaust ports.
Thanks to this concept the engine is easy to start, has high
torque under low rpm, runs smooth with very low noise. All these
features makes it a great candidate for free flight models like
the SAM category, or historical RC models and also any current
airplane. It will last for ever. The engine is equipped with a
fuel tank suitable for short Free or RC flight.
MP
Jet .040 PB Classic diesel engine, price: 85.00 U$,
sale 77.00 U$
Super Atom 1.8 diesel engine
Replica
Specifications: |
|
|
Bore: |
12mm |
0.472 |
Stroke: |
16mm |
0.629 |
Swept Volume: |
1.81ccm |
0.11 cu-in |
Weight: |
127g |
4.47oz |
Recommended rpm: |
4000-6500 r.p.m. |
|
Recommended prop: |
11"x5" -- 12 x 5 |
|
This engine is replica of the original engine
SUPER ATOM 1,8 from Mr.Vladimνr Hruka, Czechoslovakia. The
SUPER ATOM 1.8 rose from the first small batch of ATOM
1,8 made at the end of 1945. The design of the engine is a
typical first postwar, long stroke, self ignition, plain
bearing, piston controlled combustion, "T" type side scavenging,
three axial attachment lug type crankcase. This new replica is
practically the same engine as the original SUPER ATOM 1,8
except for following: heat treated crankshaft (the
original was made from silver mild steel) and cylinder liner
(the original liner was from meehanite, the original piston was
from tool hardened steel with aluminum alloy thread insert). The
new liner is from nitro carburized steel and hardened, the
piston is from a special meehanite. The other change is the new
shape of the window in liner wall. The reason to this is a
better starting and higher power. These engines are produced on
modern CNC machines like any standard MP JET engines. These
engines are produced in a 500 pieces limited series, each engine
has his serial number (on the rear side of the crankcase).
Engine spare parts parts are currently available, the
replacement of crankcase will only be done by an exchange of the
old damaged one.
Super Atom 1.8 diesel engine, price:
129.00 U$
Letmo MD-2.5 Diesel Engine Replica
Specifications: |
|
|
Bore: |
13.5mm |
0.531 |
Stroke: |
17.7mm |
0.696 |
Swept Volume: |
2.49ccm |
0.15cu-in |
Weight: |
145g |
5.11oz |
Recommended rpm: |
4000-8000 r.p.m. |
|
Recommended prop: |
11"x6" -- 11 x 7 |
|
This engine is a replica of the original engine
Letmo md-2.5 of M. Pfeffer from Brno, Czech Rep. The
Letmo MD-2.5 rose from the Letmo MD-3 engine to compete
against. The design of the engine is a typical first postwar,
long stroke, self ignition, plain bearing, piston controlled
combustion, "T" type side scavenging, three axial attachment lug
type crankcase. The new replica is practically the same engine
as the original M Pfeffer's Letmo except for following: heat
treated crankshaft (the original was from mild steel) and
cylinder liner (the new is nitro carburized, the original was
standard hardened tool steel). The other change is the new shape
of the window in liner wall. The reason to this is a better
starting and higher power. These engines are produced on modern
CNC machines like any standard MP JET engines. These engines are
produced in a 1000 pieces limited series, each engine has his
serial number (on the rear side of the crankcase). Engine spare
parts parts are currently available, the replacement of
crankcase will only be done by an exchange of the old damaged
one.
Letmo MD-2.5 diesel engine, price: 125.00 U$
MP JET .061 BB (RC) Diesel
Specifications: |
|
|
Bore: |
11mm |
0.433 |
Stroke: |
10.45mm |
0.411 |
Swept Volume: |
0.993ccm |
0.061 cu-in |
Weight: |
94g |
3.3oz |
Recommended rpm: |
12000-18000 r.p.m. |
|
Recommended prop: |
7" x 3" -- 6 x 4 |
|
The MP Jet .061
BB is a high performance output diesel engine. A two stroke
diesel engine intake by its crankshaft. Supported on two ball
bearings, Schnuerle scavenging with three transfer port.
Available in standard or with RC carburetor
version:
MP Jet .061 BB Diesel, price: 105.00 U$
MP Jet .061 BB RC
Diesel, price: 129.00 U$
|